Input/Output Interface Of Individual Wiring - Siemens MPP 464 IE H Equipment Manual

9.2

Input/output interface of individual wiring

Contact blocks
Table 9-1
Rated insulation voltage
Rated operating current
Rated operating current at 24 V
Min. rated operating current at 5 V
Volume resistance
Switching capacity
Emergency stop button S13
Rated voltage
Current rating, max.
Current rating, min.
Switching capacity
Conditional rated short-circuit current
B
10d
Note
The quantitative assessment of the emergency stop safety function must be based on the B
values corresponding to the applied standards (e.g. ISO 13849-1) under consideration of the
respective application (frequency of actuation, operating periods, diagnostics by the evaluation
unit, etc.). The B
button are taken into account.
Emergency stop override S11
Table 9-2
Rated operational voltage
Switching capacity
Min. rated operating current at 5 V
Machine Pushbutton Panel: MPP 464 IE H
Equipment Manual, 03/2021, A5E50810237B AA
Contacts with floating outputs S1 to S4 and S7 to S10
values only apply when the technical properties of the emergency stop
10d
Contacts with floating outputs
9.2 Input/output interface of individual wiring
24 VDC
3 A
1 mA
DC 13 according to EN 60947-5-1
10 A gL/gG according to EN 60947-5-1
500 000
Utilization category
(EN 60947-5-1)
AC-12
AC-15
DC-12
DC-13
Technical data
AC
Ue 50 V
Ie 2 A
Ie
I
min
10 Ie
AC
Ue 24 V
le 10 A
le 6 A
le
le
l
min
DC
50 V
2 A
1 mA
< 20 mΩ
1.1 le
10d
DC
24 V
10 A
3 A
1 mA
67