Siemens MPP 464 IE H Equipment Manual page 77

NC NC
Start Stop
Preparing standard slide-in labels with the aid of the file: "Template_MPP483.doc" (A)
1. Open the file "Template_MPP483.doc" in MS Word.
The key symbols are arranged in a table on the position that corresponds to their location on
the keyboard. The borders shown in the table are not printed.
2. Place the blank film in the printing direction in the slot of your laser printer (see figure: "Blank
film for MPP 464 IE H membrane keyboard").
3. Select "film" as the printable medium if your printer allows this setting.
4. Start the printing process using MS Word.
Note
Make a test print on paper before you print on the film.
Allow the film to cool after printing so that the ink can dry.
5. Cut the slide-in labels out of the film along the edges (outer lines).
6. Round off the corners of the slide-in labels by approx. 1.5 mm to facilitate insertion.
7. Slide in the printed slide-in label.
Preparing specific slide-in labels with the aid of the file: "Symbole_MPP483.doc" (B)
1. Open both the "Symbole_MPP483.doc" file and the "Template_MPP483.doc" file.
2. Copy the desired key symbol from the file "Symbole_MPP483.doc".
3. Position the cursor in the desired field of the template (A), add the symbol and adjust its size
accordingly by dragging it by the grab points.
4. To move a symbol to a different position,
– select the symbol,
– cut it out, and
– insert it into the desired table cell.
5. Once all of the symbols have been positioned as desired, follow the instructions in section:
"Preparing standard slide-in labels with the aid of the file: "Template_MPP483.doc" as of point
2.
Note
Input of characters/text instead of symbols
Use the "Arial" font to format text. This font is comparable to the "Univers S57" font, which is
used by Siemens for key labeling.
Machine Pushbutton Panel: MPP 464 IE H
Equipment Manual, 03/2021, A5E50810237B AA
Spare parts/accessories
10.4 Labeling the slide-in labels
77