Fujitsu Airstage UTY-DCGYZ1 Operating Manual page 29

3-2-4-1. Display Format Setting
Set the display format of date and time.

3-2-4-2. Date and Time Setting
Set the date and time of the system.


4
3-2-4-3. System Clock Adjustment
Perform the system clock adjustment.

3
4

3

5
(1) Set the item and tap the [OK] button.
No. Item
Selects from the followings.
"Day/Month/Year"
"Date Format"

"Month/Day/Year"
"Year/Month/Day"
Selects from the followings.
12:00 - 11:59 AM/PM
"Time Format"

00:00 - 11:59 AM/PM
00:00 - 23:59
(1) Set the item and tap the [OK] button.
No. Item
Sets the system date. Tap the year,
"Date"

month, and day respectively. (*)
Sets the system time. Tap the hour and
"Time"

minute respectively. (*)
"Summer Time When summer time system is used, tap
3
Setting" the [Enable].
In the displayed list as shown at the
"Time Zone
left figure, set the time zone of the area
4
Setting"
where this controller is installed.
* "Date" and "Time" are displayed in the format set at 3-2-4-1
Display Format Setting.
(1) Set the item and tap the [OK] button.
No. Item
Selects from the following 3 types.
"Master/Slave"

"Master" / "Slave" / "Disable"
"Current time
Transfers the current time.

transmission"
"Clock
Selects the clock adjustment schedule
Adjustment
3
from "Daily" or "Weekly".
Schedule"
Selects the day of week when "Weekly"
is selected.
Day
4
"Sun" / "Mon" / "Tue" / "Wed" / "Thu" /
"Fri" / "Sat"
Time Selects the time for clock adjustment.
5
Description
Description
Description
En-29