External Input Setting - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

3-4-5-1. LAN Setting
Select whether LAN connection is used or not.
3-4-5-2. Network Setting
When "Wired LAN" is selected at LAN setting, set the network.
 
4 5
3-4-6. External Input Setting
Perform the external input setting.
(3)
(1)

3
(2)

(1) Set the item and tap the [OK] button.
No. Item
Selects from the followings.
• When LAN connection is not used,
LAN Setting

• When LAN connection is used, select
(1) Set the item and tap the [OK] button.
[Initial value: Addresses are set as shown in the left figure.]
No. Item
"IP Address" (*) Sets "IP address" of remote terminal.

"Subnet Mask"
Sets "Subnet mask" of remote terminal.

(*)
"Default Sets "Default Gateway" of remote
3
Gateway" (*) terminal.
"Primary DNS" Inputs "Primary DNS" (Domain Network
4
(*) Service) of remote terminal.
"Secondary Inputs "Secondary DNS" (Domain
5
DNS" (*) Network Service) of remote terminal.
(*) [***.***.***.***] (Input 0 to 255 at "***".)
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [External Input Setting].
(4) Set the item and tap the [OK] button.
No. Item
Selects "Operation" for external input.
"Operation" "Emergency Stop", "All On/Off", "Not

Used"
Selects "Input method".
"Input Method"

"Edge", "Pulse"
Description
select "Disable".
"Wired LAN".
Description
Description
En-37