Timer Setting - Fujitsu Airstage UTY-DCGYZ1 Operating Manual

3-4-7-2. Server Setting


3
3-4-8. Timer Setting
Set the timer which stops the operation automatically to prevent you from forgetting to turn off.
(3)
(1)

3

6
4
5
6
(2)
4 5
(1) Set the item and tap the [OK] button.
No. Item
"Sender Email

Address"
"Outgoing Email

Server Address"
"Port"
3
"Account Name"
4
"Password"
5
"SSL"
6
(1) Tap the MENU button.
(2) Tap the [Installer Setting].
(3) Tap the [Timer Setting].
(4) Set the item and tap the [OK] button.
No. Item
"Auto Off Timer"

"Operation Stop

Time"
"Time Range"
3
"Start Time"
4
"End Time"
5
"Registered
6
groups"
Description
Inputs "Sender Email Address".
Inputs "Outgoing Email Server
Address".
Inputs "Port".
Inputs "Account name". (Max. 50
characters)
Inputs "Password". (Max. 12
characters)
Selects "SSL".
"None" / "SMTP over SSL" /
"STASTTLS"
Description
Sets "Enable" or "Disable" of the timer.
When "Enable" is selected,  to 5
are enabled.
Sets "Operation Stop Time" in
10-minutes unit. [30-240 min]
Selects "Time Range".
"Range Spec." / "Continuous"
Sets "Start time". When "Range Spec."
is selected, this item is enabled.
Sets "End time". When "Range Spec."
is selected, this item is enabled.
Sets the groups to be controlled.
→Refer to 2-3-1-1.
En-39