Example Of Data Communication On Sample Screen - Mitsubishi Electric MELSEC-Q Series User Manual

4.4

Example of Data Communication on Sample Screen

The following shows how to access a CPU module using the sample screen.
(1) System configuration
The following shows a system configuration for data communication. (Explanation of proxy setting is omitted.)
Network No.1
QJ71E71-100
[10.97.85.200]
Station number: 1
(2) Execution environment for the above data communication example (Ethernet
module side)
(a) Mount an Ethernet module to slot 0 of the basic base unit.
(b) Set the parameters for Ethernet using a programming tool.
For the setting items other than shown below, use the default values.
• Network parameters
Setting screen
Network parameters setting the number of
Ethernet/CC IE/MELSECNET cards
Operational settings
• Remote password
Setting screen
Remote password settings
Remote password detail settings
(c) Write data to the data registers D0 through D3.
CHAPTER 4 VERIFYING OPERATION OF WEB FUNCTION USING SAMPLE SCREEN
Web server
[10.97.85.10]
Setting item
Network type
Starting I/O No.
Network No.
Group No.
Station No.
IP address
Setting item
Password setting
Password active
module settings
System connection
Web browser
[10.97.85.201]
Ethernet
0000
1
1
1
[10.97.85.200]
* * * *
Model name QJ71E71
Start X/Y 0000
Check "HTTP port".
4
Setting data
Setting data
27