Mitsubishi Electric MELSEC-Q Series User Manual page 36

(b) Abnormal completion
(3) Setting items
The following explains the setting items on the Remote RUN/STOP screen.
(a) Connection target (character string)
Specify the IP address or host name of the connection target Ethernet module.
Ex.
To specify using the IP address, enter 10. 97. 85. 200.
(b) Target PLC (selection)
Select the target programmable controller for remote RUN/STOP operation.
*1 To perform remote RUN/STOP to a single CPU system of the QCPU or the LCPU, specify the control CPU.
(c) Operation mode (selection)
Select whether or not to execute remote RUN forcibly.
• Do not execute forcibly: Does not perform remote RUN when remote STOP is being executed from other
external device.
• Force execution: Performs remote RUN even if remote STOP is being executed from other external
device.
(d) Clear mode (selection)
Specify clear (initialization) processing of the CPU module's device clear when starting the CPU module
calculation by remote RUN.
• Do not clear: Does not clear the device memory.
• Clear all except latch: Clears the device memory outside the latch range.
• Clear all: Clears all device memory including the latch range.
34
*1