Network - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
IP Address
This page lets you configure the NVR's connection to the Internet or local network.
Enable DHCP
Select this connection if you have a DHCP server running
Client
on your network and would like a dynamic IP address to be
automatically updated to your NVR.
You may obtain a static or fixed IP address and other network
information from your network administrator. A static IP address
will simplify access to your NVR in the future.
IP Address
Enter the fixed IP address of the NVR. This is used to access the
web interface. If the NVR does not receive its address from a
DHCP server, then its default IP address is will be 192.168.0.20.
Subnet Mask
Set this to match the subnet mask of the provided IP address.
The default value is 255.255.255.0.
Default
Set this to the default gateway on your router or local subnet for
Gateway
proper network routing.
Obtain DNS
Toggle this to enable DNS automatically.
Automatically
Preferred DNS
Primary domain name server that translates names to IP addresses.
Server
Alternate DNS
Secondary domain name server to back up the primary domain
Server
name server
D-Link DNR-4020-16P User Manual

Network

Network
120