Section 3 - Configuration
On this page, you can configure the DNR-4020-16P's 16 channels and add cameras to them. To search for available cameras,
click Start Search. To add cameras to a channel, enter the username and password in the fields at the bottom of the
screen and click Add.
Channel
The channel the specified camera is on.
IP
The camera's IP address.
Model
The camera's model number.
Protocol
The protocol used to communicate with the camera.
Firmware
The firmware the specified camera is running.
Version
Operate
Click this to set or update the camera's settings.
D-Link DNR-4020-16P User Manual
Setup
Channel
Camera
12