Setting Up Your Dnr-4020-16P (Hdmi / Vga) - D-Link JustConnect DNR-4020-16P User Manual

Section 2 - Installation

Setting Up Your DNR-4020-16P (HDMI / VGA)

You can connect PoE network cameras directly to your DNR-4020-16P using the 16 PoE ports on the rear panel.
For non-PoE network cameras, you will need to locate power outlets in the on-site environment then run a CAT5 UTP cable to
the LAN ports on the NVR.
You can set up your NVR without using a PC by connecting a VGA or HDMI display to the respective port on the back of the
device. To control the Graphical User Interface (GUI), connect a USB mouse to the USB port on the front panel.
D-Link DNR-4020-16P User Manual 8