Email - D-Link JustConnect DNR-4020-16P User Manual

Section 3 - Configuration
On this page you can configure the DNR-4020-16P's email settings, such as the
email addresses that alerts and notifications should be sent to.
SMTP Server Enter the SMTP server to use, such as smtp.gmail.com.
SMTP Server
Enter the port to connect to the SMTP server on. The default
Port
is 25.
Username
Enter the username for the SMTP server.
Password
Enter the corresponding password.
Email Sender
Enter the address to send alert emails from.
Alarm Receiver
Enter the emails that should receive the NVR's alerts.
1-3
SSL
Enter the form of encryption to use, or select OFF.
Encryption
Sending
Enter an internal between 0 and 600 seconds.
interval
Test
Click this to send a test email.
D-Link DNR-4020-16P User Manual

Email

125