Electric Specifi Cations; Operating Limits - Panasonic 140 Installation And Maintenance Manual

8.3. Electric specifi cations
Power supply
Maximum current
Fuse rating aM
Without
pump
Total starting current (without Soft starter)
Total starting current (with Soft starter)
Maximum current
With
Fuse rating aM
Standard
Total starting current (without Soft starter)
pump
Total starting current (with Soft starter)
Maximum current
With High
Fuse rating aM
pressure
Total starting current (without Soft starter)
pump
Total starting current (with Soft starter)
IMPORTANT
* This data is given for guidance only. Values must be checked and verifi ed at commissioning according to prevailing
standards. They depend on the installation and the cables used.
It is mandatory to supply a main fuse or suitable circuit breaking device on the power supply.
• Fuses not supplied
• Cables not supplied

8.4. Operating limits

8.4.1. Cooling mode
55
50
45
40
35
BRINES or WATER +
30
25
20
15
10
5
BRINES or WATER +
0
GLYCOL +
-5 Fan speed controller
-10
-15
-15 -10 -5
Leaving water temperature (°C)
8.4.2. Heating mode*
25
20
15
10
5
0
-5
-10
-15
-20
15 20 25
WATER
GLYCOL
WATER +
Fan speed controller
0 5 10
30 35 40 45
Leaving water temperature (°C)
140
A 108
A 125
A 251
A 130
A 115
A 125
A 257
A 136
A 119
A 125
A 262
A 141
15 20
* 55°C can be achieved with periodic operation.
50 55 60
Please contact your local Panasonic sales or
service representative for full details.
13
150 170 190
400V / 3~ N / 50Hz
119 136 153
125 160 160
262 324 341
141 161 178
125 142 159
160 160 200
268 331 347
147 168 184
130 146 163
160 160 200
272 335 352
151 172 189
210
170
200
396
201
176
200
403
208
180
200
407
212