Table of Contents
Advertisement
PAN9520 Wi-Fi Module
6 Regulatory and Certification Information
6.1 Integration Measures for a Valid Approval
The modular approval of the PAN9520 is only valid if the OEM satisfies several requirements.
These affect mainly the output power and the limitation of the operating channel range.
This section describes how both can be controlled and what are the measures for a valid
modular approval.
The PAN9520 is distributed without software and to OEMs only. The OEM is
responsible for using a software that complies with the local regulations.
PAN9520 evaluation tools must be distributed to OEMs only.
6.1.1
Limiting the Channel Range and Setting the Country Code
The range of channels, on which the PAN9520 can operate, has to be limited according to the
location of the module (or end product). The modular approval is only valid, if the OEM applies
the needed limitations in the developed software.
This section describes how the required limitations can be implemented.
Depending on the region the PAN9520 is operating in, the range of channels
must be limited accordingly. The OEM is responsible for implementing a
software that fulfills this requirement.
Channels must be limited to following ranges:
•
•
•
The country code and channel limitations must not be changeable in the end
product/application.
Module Integration Guide Rev. 1.1
FCC (USA): Channels 1 to 11
IC (Canada): Channels 1 to 11
RED (EU):
Channels 1 to 13
6 Regulatory and Certification Information
Page 16 of 44
Advertisement
Table of Contents
