Table of Contents
Advertisement
PAN9520 Wi-Fi Module
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception (which can be
determined by turning the equipment off and on) the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna,
•
Increase the separation between the equipment and receiver,
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected,
•
Consult the dealer or an experienced radio/TV technician for help.
6.3.3
Label Requirements
The following labelling requirements have to be implemented on the OEM end product:
The OEM must ensure that FCC labelling requirements are met. This includes
a clearly visible label on the outside of the OEM enclosure specifying the
appropriate Panasonic FCC identifier for this product as well as the FCC
notice above.
The FCC identifier is FCC ID: T7V9520
This FCC identifier is valid for the PAN9520.
The end product must in any case be labelled on the exterior with:
"Contains FCC ID: T7V9520"
6.3.4
Antenna Warning
The following antenna has to be followed by the OEM:
This antenna warning refers to the device with the model number PAN9520.
The device is tested with a integrated antenna listed below. When integrated into the OEM's
product, these fixed antennas require installation preventing end users from replacing them with
non-approved antennas. Any antenna not in the following table must be tested to comply with
FCC Section 15.203 for unique antenna connectors and with Section 15.247 for emissions.
6.3.5
Approved Antenna List
Item
Part Number
1 ANT016008LCS2442MA1 TDK
Module Integration Guide Rev. 1.1
6 Regulatory and Certification Information
Manufacturer
Frequency Band
2.4 GHz
Type
Max. Gain (dBi)
Chip Antenna
Page 36 of 44
1.6
Advertisement
Table of Contents
