Panasonic PAN9520 Integration Manual page 37


PAN9520 Wi-Fi Module
6.3.6 RF Exposure
The end customer has to assure that the device has a distance of more than
20 cm from the human body under all circumstances.
If the end customer application intends to use the PAN9520 in a distance
smaller 20 cm from the human body, SAR evaluation has to be repeated by the
OEM.
The end customer equipment must meet the actual Safety/Health requirements
according to FCC.
To comply with FCC RF Exposure requirements, the OEM must ensure that
only antennas from the Approved Antenna List are installed
Antenna
The preceding statement must be included as a "CAUTION" statement in
manuals for products operating with the approved antennas to alert users on
FCC RF Exposure compliance.
Any notification to the end user of installation or removal instructions about the
integrated radio module is not allowed.
The radiated output power of the PAN9520 with a mounted ceramic antenna
(FCC ID: T7V9520) is below the FCC radio frequency exposure limits.
Nevertheless, the PAN9520 shall be used in such a manner that the potential
for human contact during normal operation is minimized.
End users may not be provided with the module installation instructions.
OEM integrators and end users must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
Module Integration Guide Rev. 1.1
List.
6 Regulatory and Certification Information
 6.3.5 Approved
Page 37 of 44