Table of Contents
Advertisement
Switching the wireless mouse on and off
You can switch the wireless mouse on and off using the synchronizer button (see figure on page 7 –
item 1) on the underside. To switch off the mouse: press the synchronizer button and briefly keep it
pressed until the optical sensor (see figure on page 7 – item 2) briefly flashes. Press the synchronizer
button once to switch the mouse back on. Renewed radio synchronization is not necessary after
switching back on.
i
If the mouse is switched off the charging function is also deactivated. Please switch the mouse back on if
you want to charge it.
Energy saver mode
The wireless mouse is equipped with an energy saver mode to spare the rechargeable batteries. If you do
not use the mouse for several minutes it automatically switches itself off. Then press any button on the
wireless mouse to switch it back on.
Charging the rechargeable batteries
To recharge the rechargeable batteries: insert the wireless mouse with the inserted rechargeable
batteries in the charger unit (see figure on the first page). The charge indicating light (see figure on
page 1 – item 11) lights up during charging.
i
The operating voltage required for charging is supplied via your computer's USB connection. Depending
on your computer model, the operating voltage at the USB connection is switched off when the computer
is switched off. You can only charge the wireless mouse's rechargeable batteries if the computer is
switched on. Optionally, you can use an external, active USB distributor (hub), to charge the wireless
mouse even if the computer is switched off (not included in the scope of supply).
10 - English
Advertisement
Table of Contents
