Table of Contents
Advertisement
The wireless mouse is connected to the charger unit by means of radio transmissions. The radio channel
must be synchronized the first time you use it. The wireless mouse and charger unit must be maximum
50cm apart for this procedure.
3.
Please press the synchronizer button on the charger unit (see figure below) to start one-off and
automatic radio synchronization between the charger unit and the wireless mouse. The receiver
indicator light on the charger unit flashes.
4.
Then press the synchronizer button on the wireless mouse within 25 seconds (see figure
below). The receiver indicator light on the charger unit soon continues to flash with a fast
rhythm. Synchronization is finished.
Receiver indicator light
Detailed view of the charger unit
If the mouse is now used the receiver indicator light flashes. If not, please repeat steps 3 to 4.
If you remove or replace the rechargeable batteries you must repeat the synchronization. Do this by
following steps 3 to 4.
Synchronizer buttons
Detailed view of the underside of the
wireless mouse
English - 9
Advertisement
Table of Contents
