Huawei OptiX RTN 980 Quick Installation Manual page 33

4
Repairing Paint
1. Codes of Color Samples
Object
Cabinets (including the APM30H and TMC11H )
Base
2. Operation Instructions
Polishing
If a damaged area is stained or the materials are rusty, polish the damaged area or the rusty materials by
using a piece of fine sand paper to remove the stain or rust.
Cleaning
Use clean cotton cloth to rub the stain or dust on the surface of the area to be polished or repaired.
Paint repair
Apply brushing paint in an appropriate color based on the original coating. Before the repair, shake the paint
properly. Then, use the small brush inside the bottle to absorb paint and evenly spread the paint on the
damaged area till the scratch/damage is covered. Note that the paint coating applied needs to be thin and
even. Ensure that drops do not appear on the paint coating and the surface is smooth.
Drying
Put the surface of the repair paint in a place at room temperature for 30 minutes, and then perform
subsequent operations.
Quality
The color of the surface of the repair area is consistent with that of the surrounding areas of the repair area,
without obvious edges and bulge. The scratch or damage needs to be covered properly, and no paint is
dropped.
Color Name Huawei Color
Code
RAL7035 YB026
3010 light grey YB030
32
International Color Code
RAL7035
Pontone 422U