EMU
User Guide
Silkscreen
GND
2.5.2 Monitoring Port for the Smoke Sensor
This describes the monitoring port for the smoke sensor. This port is a current-type Boolean
signal monitoring port and suitable for a bare terminal of a cable (24 AWG - 12 AWG).
For the position of the monitoring port for the smoke sensor, see
Figure 2-9
Figure 2-9 Monitoring port for the smoke sensor
Table 2-5
Table 2-5 Meanings of the terminals of the monitoring port for the smoke sensor
Silkscreen
24VS
Smoke
Issue 13 (2009-12-30)
NOTE
You can set bit 1 of the DIP switch SW_BKE to choose whether to use the monitoring port for the water
sensor. For details, see
2.3 Internal Structure of the
shows this port.
NOTE
The EMU supports 24 V DC smoke sensors.
lists the meanings of the terminals of the monitoring port for the smoke sensor.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Overview of the EMU
Meaning
Signal grounding terminal
EMU.
2.2 Exterior of the
Meaning
24 V DC power output
Input of smoke monitoring signals
EMU.
2-11