Monitoring Port For Analog Signals; Figure 2-14 Monitoring Port For Analog Signals; Table 2-11 Meanings Of The Terminals Of The Monitoring Port For Analog Signals - Huawei EMU User Manual

2 Overview of the EMU

2.5.7 Monitoring Port for Analog Signals

This describes the monitoring port for analog signals. This port is a voltage-type analog signal
monitoring port and suitable for a bare terminal of a cable (24 AWG - 12 AWG).
Description
For the position of the monitoring port for analog signals, see
2-14

Figure 2-14 Monitoring port for analog signals

GND2
GND4
Table 2-11

Table 2-11 Meanings of the terminals of the monitoring port for analog signals

Silkscreen
24Vi (i ranges from 1 to 4)
12Vi (i ranges from 1 to 4)
ANAi (i ranges from 1 to 4)
GNDi (i ranges from 1 to 4)
Cable Connection
Analog Sensor of the Voltage Type
2-16
shows this port.
ANA2 12V2 24V2
ANA4 12V4 24V4
lists the meanings of the terminals of the monitoring port for analog signals.
NOTE
You can set the DIP switches SW_AE and SW_AV to choose whether to use the monitoring port for Analog
signals. For details, see 2.3 Internal Structure of the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
GND1 ANA1 12V1 24V1
GND3 ANA3 12V3 24V3
Meaning
24 V DC power output of port i
12 V DC power output of port i
Analog input of port i
Signal grounding of port i
EMU.
User Guide
2.2 Exterior of the EMU.
Issue 13 (2009-12-30)
EMU
Figure