4 Installing the EMU
l
l
Procedure
Step 1 Press the EMU against the wall, and then mark the position of the four installation holes, as
shown in
Figure 4-5 RS485 serial cable
Step 2 Use the φ6 drill bit to drill the four installation holes.
Step 3 Push the expansion tubes into the installation holes, as shown in
4-6
Screwdriver, percussion drill (φ6 drill bit)
EMU, expansion rubber stoppers, tapping screws
Figure
4-5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ALARM RUN
POWER
180 mm
User Guide
236 mm
Figure
4-6.
Issue 13 (2009-12-30)
EMU