Manual for High Voltage Process Performance Motors
Chapter 2 Transport and Unpacking
2.1 Protective measures prior to transport
2.1.1 General
6 - Transport and Unpacking
The following protective measures are taken before delivery of the machine from the factory.
The same protective measures should be taken, whenever the machine is moved:
•
Some machines, and all machines with sleeve or roller bearings, have transport locking
devices installed
•
Ball and roller bearings are greased with lubricant indicated on the bearing plate, which is
attached to the machine frame, see Chapter 2.1.2 Bearing plate
•
Machined metal surfaces, such as the shaft extension, are protected against corrosion with
an anti-corrosive coating
•
In order to protect the machine properly against water, salt spray, moisture, rust and
vibration damages during loading, sea transport and unloading of the machine, the
machine should be delivered in a seaworthy package.
Figure 2-1 Bearing plate for grease lubricated rolling bearings
1.
Bearing type of D-end
2.
Bearing type of ND-end
3.
Lubrication interval
4.
Quantity of grease for D-end bearing
5.
Quantity of grease for ND-end bearing
6.
Additional information
7.
Type of grease delivered from factory
3BFP 000 063 R0101 REV D