ABB AMA Manual page 6

Declaration of Conformity
Validity
3BFP 000 063 R0101 REV D
All ABB Ex-machines intended for explosive atmosphere comply with the ATEX Directive
94/9/EC and have a CE-mark on the rating plate.
These instructions are valid for the following ABB Oy's electrical motor types, when the
machine is used in explosive atmosphere.
Non-sparking Ex nA, Class I Div 2, Class I Zone 2
- AMA Induction Machines, sizes 315 to 500
- AMB Induction Machines, sizes 560 to 630
- AMI Induction Machines, sizes 560 to 630
- HXR Induction Machines, sizes 315 to 560
- AMZ Synchronous Machines, sizes 710 to 2500
- M3GM Induction Machines, sizes 315 to 450
Increased safety Ex e
- AMA Induction Machines, sizes 315 to 500
- AMB Induction Machines, sizes 560 to 630
- AMI Induction Machines, sizes 560 to 630
- HXR Induction Machines, sizes 315 to 560
Pressurisation Ex pxe, Ex pze, Ex px, Ex pz
- AMA Induction Machines, sizes 315 to 500
- AMB Induction Machines, sizes 560 to 630
- AMI Induction Machines, sizes 560 to 630
- HXR Induction Machines, sizes 315 to 560
- AMZ Synchronous Machines, sizes 710 to 2500
Dust Ignition Protection (DIP), Ex tD, Class II Div 2, Class II Zone 22, Class III
- AMA Induction Machines, sizes 315 to 500
- AMB Induction Machines, sizes 560 to 630
- AMI Induction Machines, sizes 560 to 630
- HXR Induction Machines, sizes 315 to 560
- M3GM Induction Machines, sizes 315 to 450
(Additional information may be required for some machine types used in special applications or
with special design.)
Manual for High Voltage Process Performance Motors
Safety Instructions - 5