Advertisement
Quick Links
The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu
Microelectronics Limited on March 21, 2008.
The corporate names "Fujitsu" and "Fujitsu Limited" described all in this document have been
revised to the "Fujitsu Microelectronics Limited". Thank you for your cooperation and
understanding this notice.
Moreover, there are no changes in the related documents other than corporate names revised.
Customers are advised to consult with sales representatives before ordering.
Corporate names revised in the documents
March 21, 2008
Fujitsu Microelectronics Limited
Advertisement
Related Manuals for Fujitsu MB2198-790-01-E
Summary of Contents for Fujitsu MB2198-790-01-E
- Page 1 Corporate names revised in the documents The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu Microelectronics Limited on March 21, 2008. The corporate names “Fujitsu” and “Fujitsu Limited” described all in this document have been revised to the “Fujitsu Microelectronics Limited”.
- Page 2 FUJITSU SEMICONDUCTOR SS01-71082-1E SUPPORT SYSTEM DSU-FR EMULATOR BGA-480P ADAPTER CONFIGURATION BOARD MB2198-790-01-E OPERATION MANUAL...
- Page 3 Configuration Board (referred to as the "configuration board" in this manual). Be sure to read this doc- ument before using the product. * : FR is an abbreviation of FUJITSU RISC CONTROLLER and is a product of Fujitsu Limited. ■ Safe use of this Product This manual contains important information regarding how to use this product safely.
- Page 4 ■ Cautions of the Products Described in this Document The following precautions apply to the products described in this manual. Indicates a potentially hazardous situation which could result in death or serious injury Warning and/or a fault in the user's system if the product is not used correctly. Electric Before performing any operation described in this manual, turn off all the power sup- shock,...
- Page 5 (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in con- nection with above-mentioned uses of the products.
- Page 6 "adapter" in this manual) that configures the environment settings for developing and evaluating hardware and software that uses a Fujitsu FR family microcontroller. Take care as this product is required to be connected when using the adapter.
-
Page 7: Product Description
2. Product Description ■ System Configuration A schematic of the system configuration of this product is shown in Figure 1. Host Computer External Trigger/Program Execution General-purpose Measurement Device RS232C, USB, LAN AC Adapter AC in (supplied with the emulator) DSU-FR EMULATOR AC Adapter AC in (supplied with... - Page 8 ■ External Appearance and Component Names Figure 2 shows the external appearance and the names of each of the components of the configuration board. Adapter connector 18 mm [Front Side] [Rear Side] Figure 2 External appearance of configuration board...
-
Page 9: General Specifications
Table 2 General Specifications Item Specification Comments DSU-FR EMULATOR Product name Configuration Board Product model MB2198-790-01-E Supplied from the power supply Operating voltage VCC = 3.0 V to 3.6 V circuit on the adapter +5 °C to +35 °C Operating temperature No condensation 0 °C to +70 °C... - Page 10 4. Connection ■ Mounting the Configuration Board Use the following procedure to mount the configuration board in the configuration board connector on the adapter board (see Figure 3). 1. Align the positions of the adapter connector mounted on the rear side of the configuration board with the configuration board connector mounted on the adapter board.
- Page 11 SS01-71082-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM DSU-FR EMULATOR BGA-480P ADAPTER CONFIGURATION BOARD MB2198-790-01-E OPERATION MANUAL January 2008 the first edition Published FUJITSU LIMITED Electronic Devices Edited Strategic Business Development Dept.