Huawei OptiX OSN 8800 Hardware Description page 15

OptiX OSN 8800/6800/3800
Hardware Description


Figure 4-3 Position of the DIP switches on the EFI1 board
Ensure that the ID6 to ID8 switches are turned on as shown in
Issue 01 (2016-03-10)
When the DIP switch is ON, the value of the corresponding bit is set to 0.
As shown in Figure 4-3, the value represented by the ID5-ID1 is 000001, which is 1 in
decimal system. That is, the subrack ID is 1.
NM_ETH2
SERIAL
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 OptiX OSN 8800 Subrack
CPLD
(ID5)
ON
ON
(ID6)
ON
(ID7)
(ID8)
ON
SW1
Figure 4-3.
(ID1) ON
ON
(ID2)
ON
(ID3)
(ID4)
ON
SW2
13