Calibrate Touch Screen; Recycling And Disposal - Siemens SIMATIC TP700 Comfort INOX PCT Operating Instructions Manual

Glass front
The glass front is not chemically reactive. Prevent glass corrosion by maintaining a slightly
acid milieu.
Front panel
The edge grouting has sufficient chemical resistance when used as intended (see section
"Safety instructions").
The front panel and mounting gasket have been tested for resistance to various chemicals.
You can find the list of substances against which the front panel has been tested on the
Internet (https://support.industry.siemens.com/cs/ww/en/view/39718396) under Customer
Support – FAQ.
NOTICE
Risk of damage to the device
When cleaning the device, only use the application concentration specified by the
manufacturer of the cleaning agent or the concentration specified in the list.
Cleaning with a combination of substances may have varying effects.
If you clean the equipment with substances that are not tested or unsuitable for the device or
with suitable substances in concentrations higher than those specified, we recommend the
following:
• Cover the device during cleaning of the system.
• Clean the device separately using a suitable procedure.
4.6

Calibrate touch screen

The capacitive touch screen does not require manual calibration. No recalibration even after
a longer period of time as is the case with a resistive touch screen.
4.7

Recycling and disposal

The HMI devices described in these operating instructions can be recycled due to their low
levels of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
Maintenance and repairs
4.6 Calibrate touch screen
35