Siemens SIMATIC TP700 Comfort INOX PCT Operating Instructions Manual page 37

EU Declaration of Conformity
The EU Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Industries
Factory Automation
DI FA HMI
Breslauer Str. 5
DE-90766 Fürth, Germany
The Declaration of Conformity and other certificates are also available at the following
Internet address: SIMATIC certificates
(https://support.industry.siemens.com/cs/ww/en/ps/cert). Enter the article number in the
"Product" field.
Special approvals
DGUV approval
This device has been tested according to test basis GS-NV 6:2017/09 Testing principles for
hygiene:
• The number of the corresponding test report can be found on the DGUV label on the
device.
• Valid certificates issued by the testing and certification bodies in DGUV Test can be found
in the DGUV Test Certificate database.
UL approval
Observe the following information:
• The device shall be supplied from an isolating source, rated 24 VDC.
• Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
• UL 508 (Industrial Control Equipment)
• CSA C22.2 No. 142 (Process Control Equipment)
• ANSI/ISA 12.12.01
• CSA C22.2 No. 213 (Hazardous Location)
Approved for use in
• Class I, Division 2, Group A, B, C, D T4 or
• Class I, Zone 2, Group IIC T4 or
• non-hazardous locations
IEC 61131
The devices meet the requirements and criteria of IEC 61131-2, Programmable Logic
Controllers, Part 2: Equipment requirements and tests.
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
Technical specifications
5.2 Certificates and approvals
37