9
Printing reports
MFC settings and activity
You need to set up the Transmission Verification Report and Journal
Period in the menu table.
Menu/Set
Press
—OR—
Menu/Set
Press
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select On or On+Image , the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image or Off+Image will print a section of the fax's first page
on the report to help you remember.
When the Verification Report is turned Off , the Report will only
print it there is a transmission error, and in the RESULT column
it will show NG.
1
Menu/Set
Press
2
Press
Off+Image , On or On+Image .
Menu/Set
Press
3
Stop/Exit
Press
2
4
1
,
,
,
.
2
4
2
,
,
,
.
2
4
1
,
,
,
.
or
to select Off ,
.
.
1.Transmission
2.Journal Period
1.Transmission
PRINTING REPORTS 9 - 1