Brother HL-1800 Series User Manual page 118

☛ ☛ ☛ ☛ 6.
Press the DIMM straight into the slot (press firmly). Make sure the locks on
each side of the DIMM snap inward into place. (To remove a DIMM, the locks
must be released.)
☛ ☛ ☛ ☛ 7.
Install the PCB Access Plate. Secure the PCB Access Plate with the two
screws.
☛ ☛ ☛ ☛ 8.
Re-install the Interface Cover.
☛ ☛ ☛ ☛ 9.
Reconnect the interface cable (printer cable) from your computer. Plug the
power cord into the AC outlet, and then turn on the power switch.
☛ ☛ ☛ ☛ 10.
After you turn on the printer, the current RAM disk size will appear on the
LCD. Check it to make sure you added the new memory correctly.
Fig. 4-11
Fig. 4-12
4-15
CHAPTER 4 OPTIONS