Recommended Paper - Brother HL-1800 Series User Manual

Recommended paper

Plain Paper
Recycled Paper
Transparency
Label
♦
♦
♦
♦
♦
♦
♦
Recommended paper should have the following technical specifications:
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
♦
Europe
Xerox Premier 80 g/m
Xerox Business 80 g/m2
IGEPA X-Press 80 g/m2
Steinbis Recycling Copy 80 g/m2
3M CG3300
Avery laser label L7163
Before buying a lot of paper, please test some paper to make sure
that it is suitable.
Use paper that is designed for plain paper copying
Use paper that is 75 to 90 g/m
Use neutral paper. Do not use acidic or alkaline paper.
Use Long grain paper
Use paper with a moisture content of about 5%
This printer can use recycled paper that meets the DIN 19309
specification.
Basis Wait 75 – 90 (g/m2)
Thickness 80-110 (micrometer)
Roughness Higher than 20 (seconds)
Stiffness 90-150 (cm3/100)
Grain Direction Long Grain
Volume Resistivity 10e9-10e11 (ohm)
Surface Resistivity 10e10 – 10e12 (ohm-cm)
Filler CaCO3 (Neutral)
Ash Content below 23 (wt%)
Brightness higher than 80 (%)
Opacity higher than 85 (%)
2
2
1-12
USA
Xerox 4200DP 20 lb
Champion Paper One 20 lb
Hammermill Laser Paper 24 lb
3M CG 3300
Avery laser label #5160