Table of Contents
Advertisement
Escaping oil mist!
Risk of explosion, fire, health hazard, environmental pollution!
▶
Depressurize the machine/system and repair the leak.
▶
Keep open flames and ignition sources away from the Hägglunds drive unit.
High voltage!
Danger to life or personal injury hazard through electrical shock!
▶
Prior to accessing electrical parts with a voltage higher than 50 volts always
disconnect the device from the mains or power unit. Secure the electrical
equipment against being switched on again by accident.
▶
Observe the general deployment regulations and the safety regulations for work
on heavy-current equipment.
▶
The operation, maintenance and/or repair of such equipment is reserved to
skilled personnel qualified to work on or with electrical equipment.
▶
Prior to switching the equipment on always check the protective earth conductor
for reliable connection to all electrical equipment according to the connection
diagram.
▶
Exclusively run the component/device - even for short-time measurements or
tests - with the protective earth conductor reliably connected to the dedicated
connection points.
▶
Always wait 5 minutes after switching off power to allow live capacitors to
discharge before accessing an electric component. Measure the electrical
voltage of live parts before beginning to work to make sue that the equipment is
safe to touch.
▶
Never touch electrical connection points of the components while power is
turned on.
Danger due to incorrect mounting and setting of electrical, hydraulic and
mechanical functions as well as controls
Risk of personal injury or property damage.
▶
Follow instructions for delivered equipment.
Rotating parts!
Risk of injury or serious injuries.
▶
Do not touch rotating parts or in the zone of rotating parts.
Hägglunds DOb, RE 15327-WA/05.2017, Installation and maintenance manual, Bosch Rexroth AB
Safety instructions
wARNING
11/80
Advertisement
Table of Contents
