Table of Contents
Advertisement
General instructions on material damage and product damage
3 General instructions on material damage
and product damage
Danger from improper handling!
Product can be damaged!
▶
Do not expose the product to an impermissible mechanical load.
▶
Never use the product as a handle or step.
▶
Do not place/lay any objects on the product.
▶
Do not strike the Hägglunds drive unit or any part of it or its accessories.
▶
Do not strike fittings (e.g. sensors or valves).
▶
Do not strike sealing surfaces (e.g. service line ports).
▶
Leave the protective cover on the Hägglunds drive unit until shortly before the
lines are connected.
▶
The protections on all parts must be kept on until final assembly to avoid dirt in
the system
▶
Do not perform electro-welding on the Hägglunds drive unit.
Damage to equipment due to improper lubrication!
Product can be damaged or destroyed!
▶
Never operate the Hägglunds drive unit with insufficient hydraulic fluid.
▶
When commissioning a machine/system, make sure that the case interior and
the service lines of the Hägglunds motor are filled with hydraulic fluid and
remain filled during operation.
Mixing of hydraulic fluids!
Product can be damaged!
▶
Before installation, remove all fluids from the Hägglunds motor to prevent mixing
with the hydraulic fluid used in the machine/system.
▶
Any mixing of hydraulic fluids of different manufacturers or different types of the
same manufacturer is not permissible in general.
wrong voltage!
Electrical motor damage!
▶
All electrical supply levels shall be within the limits that the equipment is
constructed for, see Hägglunds DOb custom documentation and product
identification.
Hägglunds DOb, RE 15327-WA/05.2017, Installation and maintenance manual, Bosch Rexroth AB
NOTe
13/80
Advertisement
Table of Contents
