Table of Contents
Advertisement
9.2.2 Fast Access to Parameters Code (Function Codes) with Button
Combinations
The front panel provides a fast access to parameters within a parameter group with
the button combinations <Func> + <▲> or <Func> + <▼>. This function is only valid
for the tens digit of the function code index '.x'
The front panel provides a fast access to parameters within a parameter group with
the button combinations <Func> + <▲> or <Func> + <▼>. This function is only valid
for the tens digit of the function code index
• Pressing <Func> + <▲> once: '.x' is changed to '.x+1'
• Pressing <Func> + <▼> once: '.x' is changed to '.x-1'
Example: The frequency converter is now displaying 'E0.07' after setting with <Func>,
<Set>, <▲> and <▼> buttons. If 'E0.17' needs to be displayed based on 'E0.07', <▲>
button has to be pressed for 10 times. But, with button combination function, it is
only necessary to press '<Func> + <▲>' buttons once
Note:
→The parameter fast access function is only available when [b0.00] = 0, 1, or 2.
→ If the index of parameters is not continuous in a specific parameter group, the
adjacent parameter will be accessed. For example, the display of 'E0.01' should be
changed to 'E0.11' with '<Func> + <▲>' button function. However, parameter E0.11 is
unavailable in group E. While the adjacent parameter is E0.15. In this case,'E0.15' is
accessed and displayed.
9.2.3 Digit Shifting Function for Modification of Parameter Values
The front panel provides the digit shifting function for modification of parameter
values. To activate this function, press <Func> + <▲> or <Func> + <▼> once when the
frequency converter is displaying a certain parameter value. After this action, the
unit digit of the value blinks.
To select the digit for modification, press the following button combinations.
• Pressing <Func> + <▲> once: the blinking digit is shifted one digit leftwards.
• Pressing <Func> + <▼> once: the blinking digit is shifted one digit rightwards.
• Example: [E0.07] = 35.40. The frequency is now displaying '35.40'.If the value
'35.40' needs to modify to 15.40, execute the following steps.
• Step 1: Pressing <Func> + <▲> or <Func> + <▼> once to activate the digit function.
'35.40' is displayed with the unit digit '5' blinking.
• Step 2: Pressing <Func> + <▲> again to shift the blinking digit leftwards.
• '35.40' is displayed with tens digit '3' blinking.
• Step 3: Pressing <▼> twice to change the tens digit '3' to be '1'. '15.40' is displayed
with tens digit '1' blinking.
• Step 4: Pressing <Set> to save the modified parameter value '15.40'. The display
returns back to an upper menu level to show the next parameter with 'E0.08'
displayed.
The digit shifting function is only available for parameters with values and
unavailable for parameter with options.
Hägglunds DOb, RE 15327-WA/05.2017, Installation and maintenance manual, Bosch Rexroth AB
VFD (Variable frequency drive)
47/80
Advertisement
Table of Contents
