Logging Off - ABB Relion SAM600-IO Operation Manual

1MRK 500 131-UEN Rev. C
IEC12000157 V3 EN-US
Figure 10:
7.
Select OK on the on-screen keyboard and press
8.
Select OK in the Log on dialog and press
cancel the procedure.
If the login fails, a message is displayed on the display.
IEC12000158 V4 EN-US
Figure 11:
If a false password is entered three times, the login is blocked for that ID and the following
message is displayed:
IEC13000283 V1 EN-US
Figure 12:
IEC12000160 V2 EN-US
Figure 13:
5.1.3

Logging off

The user is automatically logged off after the display timeout. The IED returns to a state where only
reading is enabled. Manual logoff is also possible.
Switchgear control unit SAM600-IO
Operation manual
IEC12000157-3-en.vsd
Entering the password
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 shall be used in user names. User names
are not case sensitive. For passwords see the Password policies in PCM600.
IEC12000158.vsdx
Error message indicating an incorrect password
IEC13000283-1-en.vsdx
Error message indicating blocked ID
The logon dialog appears if the attempted operation requires another level of
user rights.
Once a user is created and written into the IED, login is possible with the
password assigned in the tool. If there is no user created, an attempt to login
causes the display to show a corresponding message.
IEC12000160-2-en.vsd
No user defined
© 2017 - 2021 Hitachi Power Grids. All rights reserved
to stop editing the password.
to confirm the login, or press
Section 5
Using the HMI
or Cancel to
GUID-0FDDB51B-D1C2-4442-AAE5-865BC39AE253 v1
27