Changing The Ied Functionality; Defining The Setting Group; Activating A Setting Group - ABB Relion SAM600-IO Operation Manual

Section 7
Operating procedures
IEC17000246 V1 EN-US
Figure 32:
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4. To clear other items, repeat the steps.
7.3

Changing the IED functionality

7.3.1

Defining the setting group

7.3.1.1

Activating a setting group

IED settings are planned in advance for different operation conditions by calculating setting values to
different setting groups. The active setting group can be changed manually from the menu or by the
PCM600 tool.
1.
Select Main menu /Settings /Active setting group /SETGRPS:1 and press
46
Clear view
, select OK to confirm the selection or Cancel to cancel the selection.
Do not switch off the auxiliary power supply to the IED before changes. For example,
when setting parameter changes are saved.
© 2017 - 2021 Hitachi Power Grids. All rights reserved
IEC17000246-1-en.vsd
or .
1MRK 500 131-UEN Rev. C
GUID-A9853F1B-78ED-4AEF-AAE2-C27FF3DAE408 v3
AMU0600439 v8
.
Switchgear control unit SAM600-IO
Operation manual