Page 3
This manual explains how to perform operation management and settings for the ETERNUS LT270 S2 Tape Library from the operator panel or the remote panel. This manual is intended for use of ETERNUS LT270 S2 Tape Library in regions other than Japan. Please carefully review the information outlined in this manual.
Page 4
This chapter provides information about various operations that can be performed with the operator panel. ● Chapter 3 Remote Panel Operation This chapter provides information about various operations that can be performed with the remote panel. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 5
This symbol indicates the possibility of minor or moderate personal injury, as CAUTION well as damage to the ETERNUS LT270 S2 Tape Library and/or to other users and their property, if the ETERNUS LT270 S2 Tape Library is not used properly.
Page 6
ETERNUS LT270 S2 Tape Library: - Make sure to disconnect the power when cleaning. - Be careful that no liquid seeps into the ETERNUS LT270 S2 Tape Library when using cleaners, etc. - Do not use alcohol or other solvents to clean the ETERNUS LT270 S2 Tape Library.
Page 8
Firmware Version Number of the Library and the Drive ..........102 E-mail Setup Information ....................103 SNMP Setup Information ....................106 Status of Various Units ....................107 FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 9
Rebooting the Library and Drive Units ......................156 3.13 Downloading the Traces/Logs of the Library ..............158 3.13.1 Downloading Traces ............................ 158 3.13.2 Downloading Logs ............................164 FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Initialization is started when the library is turned on. In the initialization window, the processing contents of the library are displayed. The serial number for each cabinet is displayed in an expansion configuration. Figure 1.1 Initialization window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
<IP address specified for the LT270 S2>/ Use the https URL to connect to the remote panel for the LT270 S2 in which the Key Management Function Option is used. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The message "Remote panel operating" is displayed during the remote panel operation. It displays the logical library unique name being used for the current operation. (This applies only when the logical library configuration is used.) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When this button is clicked, the alarming event-related information is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Starts executing the operation specified in the menu window. [▲]/[▼] button Scrolls a page up or down in the home window or a selection window. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
A menu that shows the library/drive status, setup, and operations is displayed. ● Main Frame A window in which settings and operations that are selected from Menu Frame can be performed is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Unit Status LCT/Robot/DCT Cluster PSU This is the operation menu for the Shelf Fan logical library configuration. Robot PSU FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
This operation menu is not displayed SCSI Log for the general user account when the Operator mode is enabled. Statistics Log Version Unit Status Log off FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Firmware Updating Indicates that the firmware is being updated. Not Connect Indicates the number of an adapter that is not connected to the host. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates that the drive is reserved by the host. The reserved drive is excluded from the targets of manual drive ejection, and cannot be ejected. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [CAS Map] button on the information menu. Information menu +CAS Map Select the CAS for which information is to be referenced. Information menu -CAS Map +CAS#0 +CAS#1 FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The tape cartridge type indicated on the cartridge label does not match the tape cartridge information in cartridge memory (CM). Figure 2.4 Reference window for the CAS cell tape cartridge information End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
WWNN: Worldwide node name of the adapter • WWPN: Worldwide port name of the adapter • LUN: LUN value (always 0 for the library) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Auto Cleaning: Setup status of the auto cleaning function Auto Inventory: Setup status of the auto inventory function Fast Load: Setup status of the fast load function FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
It is possible to reference the topology setting, Vendor ID, Product ID, and WWPN/WWNN. Procedure Click the [Drive] button from the INFORMATION menu. INFORMATION menu +Drive Specify the drive number. INFORMATION menu -Drive +DRV#00 +DRV#01 FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When IPv4 is enabled, the following items and addresses are also displayed: • DHCP Enable/Disable • IP Address • Subnet Mask • Gateway • NTP Server Address FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Figure 2.11 Network information reference window (When both IPv4 and IPv6 are enabled) Figure 2.12 Network information reference window (When IPv4 is disabled and IPv6 is enabled) End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
To reference error information (such as the date/time of occurrence and error code) of the library, click the [Library] button. INFORMATION menu -Error Log +Library The 20 most recent error items are displayed in descending chronological order. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
To reference error information (such as the date/time of occurrence and error code) of the drive, click the [Drive] button. INFORMATION menu -Error Log +Drive The 20 most recent error items are displayed in descending chronological order. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If an alarm event occurs, the Alarm button is shown in the icon area. (The Alarm button is hidden when no alarm event has occurred.) Figure 2.15 Display of the Alarm button FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Clicking the Alarm button displays the content of the current alarm event. For details of the alarm information, refer to "Library alarm error" in "7.12.1.2 Error Type of the Library" of "FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Installation & Operation-." Figure 2.16 Alarm information display window End of procedure 2.4.4...
When the [Sign Information] button is clicked, information about what has occurred is displayed. For details of information displayed, refer to "Library information" in "7.12.1.2 Error Type of the Library" of "FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Installation & Operation-." Figure 2.18 Information list window End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation-...
Old Area Version of Overall Library • Drive module Version of Overall Drive Module Version of Drive Unit Firmware Figure 2.19 Library/drive version information window End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
FAN Alarm A fan error occurred in the unit. Power Off The unit is in power-off status. Not Installed The unit is not installed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
• REMCS function (REMote Customer Support system) This function links the customer and the maintenance management system of Fujitsu to provide support such items as recognizing error occurrences, reducing recovery time, and firmware delivery. For information about the method of applying the REMCS function, contact the maintenance engineer.
A message indicating that the process is in progress is displayed. The Setup menu is displayed again when the setting is complete normally. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
After inputting the values in all of the required fields, click the [Next] button on the second page. Figure 2.23 IPv6 network setup window (1/2) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
A message indicating that the process is in progress is displayed. The Setup menu is displayed again when the setting is complete normally. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Figure 2.25 Date and time setting window A confirmation window is displayed. Click the [OK] button to proceed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
A message indicating that the process is in progress is displayed. The Setup menu is displayed again when the setting is complete. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When you log in as the administrator, the login button changes to [Admin Logout]. Use the [Admin Logout] button to log out. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If these settings complete successfully, the Setup menu appears again. Only the setting for the screen brightness on the Setup menu can be changed by general users. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If the CAS has already been assigned to a logical library that is in operation, no operation is required and therefore, this setting is disabled. When the end message appears, the CAS assignment is complete. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Select the CAS to open by clicking the CAS number button. CAS Open menu +CAS#0 +CAS#1 If the CAS door cannot be opened, the CAS number button is dimmed in gray. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Retry loading when the library is no longer busy. • To unload a tape cartridge, eject it manually. For information on manually ejecting tape cartridges, refer "2.11 Ejecting Tape Cartridges" (page 57) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
You can specify as many drives as the tape cartridges specified above. OPERATION menu -Load -CAS#0 -CAS Cell#10 +DRV#01 A confirmation window is displayed. Click the [OK] button if it is OK to proceed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If cleaning is attempted while backup software is accessing the library, a message is displayed stating that the library is busy. Retry the cleaning when the library is no longer busy. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
A message indicating that the process is in progress is displayed. If the display changes to an end message, cleaning of the specified drive is completed. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If a cleaning cartridge that cannot be inserted is detected, a media error message appears in the operation result window. Reference the CAS Map information and check the cleaning cartridge status. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
Click the [Next] button when specifying the cleaning cartridge to be loaded is complete. More than one cleaning cartridge can be selected. Operation MENU -Clean -Insert Clean Tape -CAS#0 +CAS Cell#00 +CAS Cell#01 FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Cleaning cartridge ejection is complete when an end message is displayed. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Retry recovery operation while the library is not being used. Figure 2.36 Home window displaying a drive hardware error FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
If an inventory operation is attempted while the backup software is accessing the library, a message is displayed stating that the library is busy. Retry the inventory operation when the library is no longer busy. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
A message indicating that the process is in progress is displayed. An end message appears when ejection of the tape cartridge is completed. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Log in to the administrator account and then click the [Operator Mode] button from the Setup menu. Figure 2.40 Selecting the [Operator Mode] button FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
For general users: The [CAS Open] button and reference information are available for use. Figure 2.42 Drive status when the operator mode is disabled FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The [CAS Open] button and reference information are available for use. (The display is the same as that for general users when operator mode is disabled.) Figure 2.44 Operator login End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Example: When the IP address is set as "2001::1", enclose the address with brackets as follows: http://[2001::1]/ Click the [Start] button in the start window of the remote panel. The following login window is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Administrator Status reference, settings, operations, and admin/admin (default) downloads are allowed The general user account allows simultaneous logins, whereas the administrator account does not. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If the login is fails, the following window is displayed. Figure 3.2 Window displayed when the login fails Click "Go to LOGIN window" to return to the login window. Enter the correct values. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
To not forcibly log off, click the [No] button (If accessed via a proxy server, the IP address of the proxy server is displayed as Login IP Address.). End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The home window is automatically updated every 10 seconds. Figure 3.4 Status reference window of the library/drive FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates that an error has occurred in the drive or the cooling fan of the drive has failed (The error status can be identified by the information attached to the icon.). The following types of status are displayed in the home window. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Clicking the [Cell Map] button displayed under [Information] displays the configuration diagram of each cabinet. Select a target cabinet by scrolling down the drop-down list. Figure 3.7 Cell type selection window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [User Cell] button and then the [OK] button to display a cabinet configuration diagram. Select the cabinet drawer or back cell you want to reference. Figure 3.8 Cabinet configuration window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Select a cell number button to display information about the tape cartridge loaded in the corresponding cell. Figure 3.10 User cell tape cartridge information display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates that the tape cartridge is not supported. Unmatch Indicates that the contents of the tape cartridge and the label data do not match. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Status For more details, refer to Table 3.6. Media Type Indicates the tape cartridge type. If the type cannot be identified, "Unknown" is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If there is no tape cartridge in the drive, "No_Tape" is displayed. Drive Type Indicates the drive type. If the type cannot be identified, "Unknown" is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
For more details, refer to Table 3.6. Media type Indicates the tape cartridge type. If the tape cartridge type is unknown, "Unknown" is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates the date of manufacture of the tape cartridge in the year/month/day format. Fast Mount Time Stamp Indicates the date of the first mounting of the tape cartridge in the year/month/day format. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates the date of manufacture of the tape cartridge in the year/month/day format. Fast Mount Time Stamp Indicates the date of the first mounting of the tape cartridge in the year/month/day format. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
To find a tape cartridge with a barcode label that the library does not recognize, leave the input box blank and click the [Search] button. Figure 3.16 Barcode label search window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When logical libraries are created, the information on only the adapters assigned to the selected logical library at a login is displayed. "Not Assigned" is displayed with the adapters assigned to other logical libraries. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Displays the Link Speed settings (Auto Negotiation). World Wide Node Displays the World Wide Node Name. Name World Wide Port Name Displays the World Wide Port Name. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
(cell/drive/magazine), and the Vendor ID and Product ID can be referenced. The displayed items for physical library configuration are different from those for logical library configuration. Figure 3.19 Library setup information display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Displays the serial number of the library. Model Name Displays the model name of the library. Check Code Displays the check code of the library. Displays the LUN number. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Displays the WWPN of the drive. Drive Type Displays the host interface type of the drive. Drive Vendor ID Displays the Vendor ID of the drive. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
By clicking the [Network] button displayed under [Information], setup information for the network such as the IP address, subnet mask, gateway, and MAC address can be referenced. Figure 3.21 Network setup information display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
(The latest 20 pieces of information are displayed. Entry 1 indicates the latest error.). If no error history is registered, "No entries in library/drive history" is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
Select the target cabinet from the drop-down list. The drop-down list is not displayed when only a single base cabinet is used. Figure 3.23 Statistical information display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The Thread Count cell of a cartridge that has reached its near-replacement or replacement threshold is displayed in pale yellow (indicating near-replacement threshold reached) or deep yellow (indicating replacement required). Figure 3.24 Window that displays tape cartridge statistics FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When you click the [Robot] button, the window displays statistical information on the move count for each component of a robot. Figure 3.25 Window that displays robot statistics FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The Thread Count cell of a drive that has reached its near-replacement or replacement threshold is displayed in pale yellow (indicating near-replacement threshold reached) or deep yellow (indicating replacement required). FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates the suspend write error rate per gigabyte. Write Data Sets Indicates the data write throughput. Read Data Sets Indicates the data read throughput. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
By clicking the [Version] button displayed under [Information], the version number of the library firmware and drive firmware can be referenced. Figure 3.27 Firmware version number display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
By clicking the [E-mail] button displayed under [Information], setup information for e-mail such as the source e-mail address, destination e-mail address, and SMTP server address can be referenced. Figure 3.28 E-mail setup information display window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates the total version number of the drive module 01. Drive 01 Firmware : 53Y2 Indicates the firmware version number of the drive unit 01. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Indicates the total version number of the drive module 01. Drive 01 Firmware : 53Y2 Indicates the firmware version number of the drive unit 01. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When logical libraries are created, the information of only clusters and DCIs that are assigned to the logical library selected at a login is displayed. Figure 3.30 Unit status window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The unit is not installed. PWCT Active The unit is active. Error The unit is in error status. Power Off The unit is in power-off status. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
• Only drives that can be set are displayed in the window. For drives that cannot be set, the current value is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [OK] button if it is OK to proceed. To make entries again, click the [Back] button. If processing is completed, the system displays a window showing the processing results. This completes the settings. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If there is no adapter that can be set due, for example, to adapter errors, the message "No adapter card installed." is displayed. • Only adapters that can be set are displayed in the window. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If processing is completed, the system displays a window showing the processing results. To continue settings of the host interface, repeat the above procedure starting with Step FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [Library] button displayed under [Setup] in the menu frame. The library setting window will be displayed. If the library settings are already made, its values are displayed. Figure 3.34 Library information setting window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Enable or disable the power saving mode of the drives. • Enable: The drives are started with the power saving mode. (Default) • Disable: The drives are started without the power saving mode. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [Network] button displayed under [Setup] in the menu frame. The network setting window will be displayed. If the network settings are already made, its values are displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
This item needs to be set if accessed from outside SUB-LAN or accessed from the browser via a proxy server inside SUB-LAN. Only numeric characters can be entered. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 117
When the network settings are changed, the connection to the remote panel is disconnected. To reconnect to the remote panel, the LT270 S2 must be restarted. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [Date/Time] button displayed under [Setup] in the menu frame to display the date/ time setting window. If the date/time are already set, their values are displayed. Figure 3.36 Date/time setting window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [E-mail] button displayed under [Setup] in the menu frame to display the e-mail setting window. If the e-mail function is already set, its values are displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
Click the [OK] button if it is OK to proceed. To make entries again, click the [Back] button. If processing is completed, the system displays a window showing the processing results. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The e-mail settings must be completed before running the Send E-mail test. Procedure Click the [E-mail] button displayed under [Setup] to display the following window. Figure 3.38 E-mail function setting window: sending test FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [Email Test] button. The following window is displayed. Figure 3.39 Window for starting the Send E-mail test To start the Send E-mail test, click [OK]. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
After the mail delivery is completed, the following window is displayed. Verify that the test e-mail has been delivered to the specified e-mail address. Figure 3.40 The Send E-mail test result window End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [SNMP] button displayed under [Setup]. The following window will be displayed. If the SNMP agent is already set, its values are displayed. Figure 3.41 SNMP agent setting window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
• IPv6 format Alphanumeric characters can be entered. • DNS format Characters that can be entered are alphanumeric characters and symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 127
If settings are finished, the system displays a window showing the processing results. If settings have been completed successfully, the SNMP agent is restarted (automatically). End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
IP address. The following trap is test-transmitted: "Trap for test" The SNMP settings must be completed before running the SNMP Trap Test. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
After transmission is completed, the following window is displayed. Verify that the trap is transmitted to the device having the specified destination IP address. Figure 3.44 SNMP trap transmission completion window End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
MIB files that are registered in the LT270 S2 can be downloaded. Procedure Click the [SNMP] button on the Setup menu. The window shown below is displayed. Figure 3.45 SNMP trap setup window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Scroll down the window and click the [Download] button that is located at the very bottom of the page. Figure 3.46 SNMP setup window (download) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Figure 3.47 MIB/trap file download window Follow the instructions displayed in the dialog boxes to download and save the file. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Enter a new password (one to eight characters). Characters that can be entered are lowercase alphabetic characters, numeric characters and the period (.) symbol. New password Enter the new password again. (confirmation) FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 136
Responsibility for the new password is the user's. Do not forget the password. If you forget the current password, contact the maintenance engineer. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Use the drop-down list to select the cabinet. The CAS cannot be opened in the state of "User Cell", "CAS door is open," "In Use," or "CAS Prevent". FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
This section explains how to manually clean drives. Procedure Click the [Clean] button displayed under [Operation] to display the following window. Figure 3.50 Clean menu window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [OK] button if it is OK to proceed. To make selections again, click the [Back] button. The system displays a window showing the processing results, completing the manual cleaning. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If a cleaning cartridge that cannot be inserted is detected, a media error message appears in the operation result window. Reference the CAS Map information and check the cleaning cartridge status. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
When cleaning cartridge loading is completed, an end message appears. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
A cleaning cartridge in the cleaning cell is ejected into the CAS. Procedure Click the [Clean] button displayed under [Operation]. The following window is displayed. Figure 3.54 Clean menu window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Use the drop-down list on the "To" side to select the cabinet that contains the cleaning cartridge that is to be ejected. A cabinet with a CAS that is set as a User Cell cannot be selected. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Figure 3.56 CAS selection window Select a CAS. The cell map of the specified CAS is displayed. Select a tape cartridge to insert. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If ejection is attempted while the backup software is accessing the library, a message is displayed stating that the library is busy. Retry the ejection when the library is no longer busy. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED...
When cartridge ejection from all specified drives is completed, an end message appears. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
If a hardware error of the drive occurs, "error code" is displayed in the Status window. Procedure Click the [Drive Reset] button displayed under [Operation]. The following window is displayed. Figure 3.58 Drive reset window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 149
Recovery is complete when an end message is displayed. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Retry the inventory operation when the library is no longer busy. Procedure Click the [Inventory] button displayed under [Operation]. The following window is displayed. Figure 3.59 Inventory window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 151
In such case, check the information in the Invalid CELL Information window, and then remove the invalid tape cartridge. For information on handling invalid cartridges, refer to "3.4.2 Ejecting Tape Cartridges" in "FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Installation & Operation-".
Click [OK] to proceed. After processing is completed, the system displays a window showing the processing results, completing the trace operation. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Click the [Save] button in the dialog box. Select the download destination directory, enter the file name for saving, and then click the [Save] button. The download will start. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
The window above may not be displayed. Whether the above window is displayed depends on the Web browser settings, the Web browser version, and the Web browser type. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
When rebooting starts, the remote panel is disconnected from the Web browser. Reconnect to the Web browser to use the remote panel again. End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Clicking the [Trace Download] button displayed under [Support] displays the window for selecting the trace type to download. Figure 3.66 Trace type selection window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
For library traces, clicking the [Download] button next to Library Trace displays the window for starting the download preparations. Click the [OK] button. Figure 3.67 Library trace preparation window Preparations for the download are started. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
A download notification bar is displayed at the bottom of the window. Save the trace file to your desired location. Figure 3.68 Window for starting the library trace download End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Select the drive and click the [OK] but- ton. Figure 3.69 Window for selecting the drive to download the trace The confirmation window for downloading drive traces is displayed. FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Save the drive trace file to your desired location. Figure 3.72 Completion window for the drive trace download End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Clicking the [Log] button displayed under [Support] displays the window to select the logs. Click the [Download] button next to All Logs. Figure 3.73 Log selection window FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Figure 3.74 Window for starting the log download When the log download is started, the download execution window is displayed. Figure 3.75 Execution window for the log download FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Save the log file to your desired location. Figure 3.76 Completion window for the log download End of procedure FUJITSU Storage ETERNUS LT270 S2 Tape Library User’s Guide -Panel Operation- Copyright 2020 FUJITSU LIMITED P3AM-6932-06ENZ0...
Page 167
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.