Ironing without steam
NOTE
Always set the temperature control 4 to the lowest level (min) before switching
the appliance on . The symbols on the temperature control 4 correspond to
the following settings:
♦
Insert the plug into a mains power socket .
♦
Set the On/Off switch w to the position "1" to switch the appliance on . The
integrated control lamp in the On/Off switch w and the heat-up indicator
lamp 3 light up, the "MAX" button z flashes .
♦
Turn the temperature control 4 to set the required ironing temperature .
♦
The heat-up indicator lamp 3 lights up during heating . As soon as the heat-
up indicator lamp 3 goes out, the set temperature has been reached and
you can start ironing .
♦
Put the iron down on the stand 7 on the base station q after ironing .
Set the temperature control 4 to "min" .
♦
Set the On/Off switch w to the position "0" to switch the appliance off . The
integrated control lamp in the On/Off switch w and the "MAX" button z
go out .
♦
Pull the plug out of the mains socket .
■
12
│
GB │ IE │ NI │ CY
Symbol
min –
(– max)
Temperature
Material
Synthetics
Silk
Wool
Cotton/linen
(approx .)
70–120°C
70–120°C
100–160°C
140–210°C
SDBS 2400 B2