Ironing Without Steam; Ironing With Steam; Power Steam Function; Cleaning - Silvercrest SDB 2200 B1 Operating Instructions Manual

Table of Contents

Advertisement

__RP_70069_B6.book Seite 6 Dienstag, 1. November 2011 5:15 17

4.5 Ironing without steam

Delicate fabrics are ironed at low tempera-
tures without using steam. You can use
the spray function to moisten your laundry.
1. Set the steam level controller 13 to
and the temperature controller 9
to MIN.
2. Fill the water tank 8 if you wish to use
the spray function.
3. Set the steam iron into a vertical posi-
tion.
4. Insert the power plug into a wall socket.
The pilot light 1 on the handle 2 lights
up.
5. Select the required temperature on the
temperature controller 9. The temper-
ature control lamp 5 lights up.
6. You can start ironing as soon as the
ironing temperature is reached and
the temperature control lamp 5 is
extinguished.
7. When you finish ironing, set the tem-
perature controller 9 to MIN and
unplug the appliance.
8. Let the steam iron cool down, pouring
out any water left in the water tank 8
through the filler opening of the tank.

4.6 Ironing with steam

Ironing with steam calls for a high temper-
ature, at least temperature level
can use the spray function to moisten your
laundry.
1. Set the steam level controller 13 to
and the temperature controller 9
to MIN.
2. Fill the water tank 8.
3. Set the steam iron in a vertical position.
4. Insert the power plug into a wall socket.
The pilot light 1 on the handle 2 lights up.
5. Select the required temperature on the
temperature controller 9 (at least
The temperature control lamp 5 lights up.
6
GB
6. You can select the required steam level
or
ler 13 and start ironing as soon as the
ironing temperature is reached and the
temperature control lamp 5 is extin-
guished.
Steam will be ...
... produced as soon as you hold the
iron horizontally and
... stop as soon as you hold the iron
vertically or set the steam level
controller 13 to
7. When you finish ironing, set the tem-
perature controller 9 to MIN, the steam
level controller 13 to
the appliance.
8. Let the steam iron cool down, pouring
out any water left in the water tank 8
through the filler opening of the tank.

4.7 Power steam function

This function calls for a high temperature,
at least temperature level
water tank 8 has to be at least a quarter-full.
Press the Power steam button 15
while moving the iron over the item of
laundry.
Wait a few seconds before pressing
the Power steam button
TIP: To iron hanging garments you can also
use the power steam function vertically.
. You

5. Cleaning

DANGER! Unplug from the wall
socket before cleaning the steam
iron.
Leave the appliance to cool down
before cleaning.
CAUTION: Do not use harsh or abrasive
cleaning agents.
).
on the steam level control-
.
and unplug
. Here the
again.

Advertisement

Table of Contents
loading

This manual is also suitable for:

70069

Table of Contents