Computer Input; Selecting The Input Source; Selecting The Computer System - Canon LV-S2 Owner's Manual

COMPUTER INPUT

DIRECT OPERATION
Choose Computer by pressing the INPUT button on Top Control or on
Remote Control Unit.
If the projector cannot reproduce a proper image, select correct input
source through the MENU OPERATION (see below).
MENU OPERATION
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT button to move the red
frame to the INPUT Menu icon.
2 Press the POINT DOWN button to move the red arrow to
Computer and then press the SET button.
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to
"COMPATIBLE COMPUTER SPECIFICATION" on page 23). When selecting Computer, this projector automatically tunes
to incoming signal and projects proper image without any special setting. (Some computers need to be set manually.)
Note : Projector may display one of the following messages.
When the projector cannot recognize the connected
Auto
signal, the Auto PC Adjustment function adjusts the
projector and the message "Auto" is displayed on the
SYSTEM Menu icon. (Refer to P24.) When the image is
not displayed properly, manual adjustment is required.
(Refer to P25 and 26.)
There is no signal input from the computer. Make sure
––––
the connection between the computer and the projector
are set correctly.
(Refer to TROUBLESHOOTING on page 40.)
SELECT THE COMPUTER SYSTEM MANUALLY
This projector automatically selects the PC system among those
provided in this projector and PC system can be also selected
manually.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to move the red
frame to PC SYSTEM Menu icon.
2 Press the POINT DOWN button to move the red arrow to the
system that you want to set, and then press the SET button .
22

SELECTING THE INPUT SOURCE

SELECTING THE COMPUTER SYSTEM

INPUT button
Computer
Video
INPUT MENU
INPUT Menu icon
Move the red arrow to
Computer and press the
SET button.
PC SYSTEM MENU
SYSTEM Menu icon
Displays system being
selected.
PC SYSTEM MENU
SYSTEM Menu icon
Displays system being selected.
The systems on this dialog box
can be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P25, 26)