Pc Adjustment; Auto Pc Adjustment - Canon LV-S2 Owner's Manual

COMPUTER INPUT
The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to
your computer. Auto PC Adjustment function can be operated as follows.
Auto PC Adj.
1 Press the MENU button and the ON-SCREEN MENU will
appear. Press POINT LEFT/RIGHT button to move the red
frame to PC ADJUST Menu icon.
2 Press the POINT DOWN button to move the red frame to the
AUTO PC Adj. icon and then press the SET button twice.
This Auto PC Adjustment can be also executed by pressing the
AUTO PC ADJ. button on the Remote Control Unit.
Store adjustment parameters.
Adjustment parameters from Auto PC Adjustment can be memorized
in this projector. Once parameters are memorized, setting can be
done just by selecting Mode in PC SYSTEM Menu (P22). Refer to
step 3 of MANUAL PC ADJUSTMENT section (P26).
NOTE
G Fine sync, Total dots and Picture Position of some computers can
not be fully adjusted with this Auto PC Adjustment function. When
the image is not provided properly through this function, manual
adjustments are required. (Refer to page 25, 26.)
G Auto PC Adjustment function cannot be operated when "RGB,"
"720p (HDTV)," "1035i (HDTV)" or "1080i (HDTV)" is selected on PC
SYSTEM Menu (P22).
24

PC ADJUSTMENT

AUTO PC ADJUSTMENT

PC ADJUST MENU
Move the red frame to AUTO PC Adj. icon
and press SET button.
PC ADJUST Menu icon