Selecting The Video System - Canon LV-S2 Owner's Manual

SELECTING THE VIDEO SYSTEM

1 Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT buttons to move the red
frame to AV SYSTEM Menu icon.
2 Press the POINT DOWN button to move the red arrow to the
system that you want to select and then press the SET button.
VIDEO JACK OR S-VIDEO JACK
Auto
Projector automatically detects the incoming Video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If projector cannot reproduce a proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr JACKS
Auto
The projector automatically detects the incoming Video signal, and
then adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce a proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i and 1080i.
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM Menu icon
This box indicates the system
being selected.
Move the red arrow to
the system and press
the SET button.
AV SYSTEM MENU (COMPONENT VIDEO)
AV SYSTEM Menu icon
This box indicates the system
being selected.
Move the red arrow to
the system and press
the SET button.
VIDEO INPUT
31