Entering The Pipe Inner Diameter; Entering / Changing Consumption Counter Value - Beko METPOINT FLM SF53 Installation And Operating Manual

Thermal flow meter

Hide thumbs Also See for METPOINT FLM SF53:

Table of Contents

6.3.1. Entering the pipe inner diameter

Setup → Sensor Setup → Diameter

Setup → Sensor Setup → Total Counter

NOTE

Consumption counter value

When the consumption counter reaches 1,000,000,000 m³, it is automatically reset to zero.

METPOINT

SF53

To make changes to the unit (for example), press the >>UP<<

button to select the "Unit" field and confirm by pressing the

>>ENTER<< button.

Press the >>UP<< button to select the unit to use and then con-

firm by pressing the >>ENTER<< button twice.

Press the >>UP<< button to select the value to be changed and

confirm by pressing the >>ENTER<< button.

Press the >>UP<< button to enter the new value and confirm by

pressing the >>ENTER<< button.