Entering Pipe Inside Diameter; Entering / Changing Consumption Counter Value - Beko METPOINT Installation And Operating Manual

EN

6.3.1. Entering pipe inside diameter

Setup → Sensor Setup → Diameter

6.3.2. Entering / changing consumption counter value

Setup → Sensor Setup → Total Counter
NOTICE Consumption counter value
When the consumption counter reaches 1,000,000,000 m³, it is automatically reset to 0.
29
To change the unit, press the >>UP<< button to select the "Unit"
field and confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to select the desired unit and confirm
by pressing the >>ENTER<< button 2x.
Press the >>UP<< button to select the value to be changed and
confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to enter the new value and confirm by
pressing the >>ENTER<< button.
To change the unit, press the >>UP<< button to select the "Unit"
field and confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to select the desired unit and confirm
by pressing the >>ENTER<< button 2x.
Press the >>UP<< button to select the value to be changed and
confirm by pressing the >>ENTER<< button.
Press the >>UP<< button to enter the new value and confirm by
pressing the >>ENTER<< button.
Installation and operating manual
METPOINT SF53
®