LG Cloud Device All-in-One Thin Client Safety And Regulatory Information Manual page 17

Precautions When Cleaning the Product
The medical LCD monitor's front protective panel has been specially processed to reflect less light.
Using solvents such as thinner or benzene, acidic, alkaline or corrosive detergents, chemical cleaning fibers, etc.
may damage the finish material on the surface.
• Unplug the power cord before cleaning.
• Never spray water directly onto the monitor or use thinner or benzene solvents, acidic, alkaline or corrosive
detergents, or cleaning or sterilizing chemical cleaning fibers, etc. as they may damage the product.
• To clean the product, unplug the power cord and wipe it gently with a soft cloth. Do not spray with water
or wipe with a wet cloth. When cleaning the product or the screen, do not use cleansers, automobile or
industrial thinners, abrasives or wax, benzene, alcohol, etc., as this may damage the product.
• To clean the front frame, spray water onto a soft cloth two to four times and wipe in one direction only.
• Do not rub the product with a stained cloth using more force than necessary. This may scratch the surface of
the product.
• Do not allow the product to remain in contact with rubber or vinyl resin for extended periods. The surface
finish may deteriorate or the coating may peel off.
• If you do not clean the product, dust will accumulate inside and may create a fire hazard or malfunction.
Image Sticking Precautions
• Displaying a still image for a prolonged period may damage the screen, resulting in image sticking. Most
third-party products have the same issue. Damage resulting from long-term static images is not covered by
product warranty.
17