Table of Contents
Advertisement
Installation and operating manual
6.8. 4 ... 20 mA
Setup → 4 - 20 mA
Setup → 4 - 20 mA → Channel 1
34
On this screen, you can adjust the settings for the 4 ... 20 mA
current output.
The following measurements can be configured:
•
Flow
•
Velocity
•
Temperature
•
unused = deactivate channel
The screenshot to the left shows the available units for flow. Press
the "<<" button to call up the next screen.
The scaling of the 4 ... 20 mA current output can be set to
automatic ("AutoRange = on") or manual ("AutoRange = off").
With "AutoRange = on", the sensor automatically calculates the
valid measuring range and associated reference conditions, based
on the set pipe diameter.
Select "Scale 4mA" and "Scale 20mA" to manually configure the
scaling of the output (precondition: "AutoRange = off").
Enter the scale of the current
output for 4 mA and 20 mA
respectively.
METPOINT
®
EN
SF13
Advertisement
Table of Contents
