Flexi Pad Control Block - Sony XVS-G1 User Manual

Flexi Pad Control Block

The Flexi Pad control block is used for recalling and
saving snapshots, wipe snapshots, DME wipe snapshots,
and key snapshots, for recalling and creating macros, for
recalling shotboxes, for entering the transition rate, and for
other tasks.
a
a Mode selection buttons / operation buttons / bank
selection buttons (assignable buttons)
You can assign mode/bank selection buttons and operation
buttons in the Home > Setup > Panel > Module > Button
Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 317).
Mode selection buttons
Function Button name Description
name
Key KEY
b
Switches to key operation
mode.
In key operation mode, you
can carry out the following
operations.
• Saving and recalling key
snapshots
• Selecting independent
key transition type
• Selecting the key fill
signal or key source
signal in the cross-point
control block
Function Button name Description
name
Wipe WIPE
DME Wipe DME WIPE
Snapshot SNAPSHOT
Shotbox SHOTBOX
Macro MCRO
Transition Rate TRANS
RATE
[UNDO] button / [DEL] button
Function Button name Description
name
Undo UNDO
Delete DEL
Notes
• The [UNDO] button and [DEL] button cannot be used in
shotbox operation mode.
20
Switches to wipe snapshot
operation mode.
In wipe snapshot operation
mode, you can save and
recall a wipe snapshot and
select a wipe pattern.
Switches to DME wipe
snapshot operation mode.
In DME wipe snapshot
operation mode, you can
save and recall a DME wipe
snapshot and select a DME
wipe pattern.
Switches to snapshot
operation mode.
In snapshot operation
mode, you can save and
recall snapshots, and add
attributes.
Switches to shotbox
operation mode.
In shotbox operation mode,
you can recall and execute
shotboxes.
Switches to macro
operation mode.
In macro operation mode,
press and hold the [MCRO]
button and press a button
(for the target register) in
the memory recall section
to enter edit mode.
In macro operation mode,
you can save, recall, and
edit macros.
Switches to transition rate
operation mode.
In transition rate operation
mode, you can enter a
transition rate.
After recalling a register,
returns to the state before
the register was recalled.
Press and hold the [DEL]
button and press a register
button in the memory recall
section to delete the
register data.