Setting Resizer Effects - Sony XVS-G1 User Manual

Mode1: Even when the picture is reduced, add
compensation so that it can be seen clearly
(standard).
Mode2: Suppress aliasing when enlarging or reducing
the picture (soft).
Mode3: Do not suppress aliasing when enlarging or
reducing the picture (sharp).

Setting Resizer Effects

Setting a wide key border
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Dual Rszr Effect] button to the on state.
4
Set the [Wide Key Border] button to the on state and
set the following parameters.
No. Parameter
1 H
2 V
3 All
4 Soft
5 Density
a) Common to the [Soft] drop shadow parameter.
5
Set the [Border Color] button to the on state and set the
following parameters.
No. Parameter
1 Luminance
2 Saturation
3 Hue
To add an outline to a wide key border
Set the [Outline] button to the on state.
Setting a drop shadow
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
Adjustment
Simultaneous adjustment of
border width of left and right
edges
Simultaneous adjustment of
border width of top and bottom
edges
Simultaneous adjustment of
border width of top, bottom,
left, and right edges
a)
Softness of border
Density of border
Adjustment
Luminance
Saturation
Hue
3
Set the [Dual Rszr Effect] button to the on state.
4
Set the [Drop Shadow] button to the on state and set
the following parameters.
No. Parameter
1 H
2 V
3 Size
4 Soft
5 Density
a) Common to the [Soft] wide key border parameter.
Setting edge enhance
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Edge Enhance] button to the on state and set
the following parameters.
No. Parameter
1 H
2 V
3 All
Setting a mosaic
1
Open the Home > M/E-1 > Key1 > Resizer/Proc Key
> Enhanced Effect menu (11101.42).
2
Set the [Resizer] button to the on state.
3
Set the [Mosaic] button to the on state and set the
following parameters.
No. Parameter
1 Size
2 Aspect
4
In the [Mosaic/Defocus Mode] group, select a signal to
which to apply the mosaic effect.
Video/Key: Video signal and key signal
94
Adjustment
Shadow position in the
horizontal direction
Shadow position in the vertical
direction
Shadow size
a)
Softness of shadow
Density of shadow
Adjustment
Gain in horizontal direction
Gain in vertical direction
Simultaneous adjustment of
gain in horizontal direction and
vertical direction
Adjustment
Tile size
Tile aspect ratio
• Negative values expand
vertically.
• Positive values expand
horizontally.