Product Overview; Specifications; Operation - Toro Flex-Force Power System 51833 Operator's Manual

Product Overview

Specifications

Model
Blade Length
Rated Voltage
No-load Speed
Weight (without battery
pack)
Charger Type
Battery Type
Appropriate Temperature Ranges
Charge/store the battery pack
at
Use the battery pack at
Use the edger at
Store the edger at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
51833
203 mm (8 inches)
60V DC maximum, 54 VDC
nominal usage
7000 rpm
4.7 kg (10.4 lbs)
88610 (included with 51833),
88602, or 88605
88620 (included with 51833),
88625, 88640, 88660, or
88675
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)*

Operation

Starting the Edger
1. Align the cavity in the battery pack with the
tongue on the handle housing
2. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
3. To start the edger, pull back on the lockout
button, then squeeze the run trigger
Note:
Once the edger is running you can
release the lockout button.
1. Lockout button
10
(Figure 3).
(Figure 3).
Figure 3
(Figure
Figure 4
2. Run trigger
g333238
4).
g333239