Pc Adjustment - Sanyo PDP42H2W Owner's Manual

COMPUTER MODE
"PC mode adjustment" menu is provided to adjust "Clock", "Phase", "Position" and "Power save" to conform to your
computer. These functions can be operated as follows:
1
Press the MENU button and the On-Screen Menu will appear.
2 Press the e e d d
and then press the OK button. "PC mode adjustment" menu will
appear.
3
Press the e e d d
and then press the OK button. The selected item will appear.
4 Adjust each value by pressing the 78 buttons.
Auto setup
"Auto setup" function is provided to automatically adjust "Clock",
"Phase" and "Position" to conform to your computer.
"Auto setup" can be started by pressing the the 8 button, and the
message "Now adjusting" will be displayed.
To return to the previous menu, press the STATUS button after the
adjustment is completed.
NOTE :
●
While the Auto setup is working, pressing the MENU button finishes
adjustment immediately and the message "Auto setup" will disappear.
●
In the following cases, the Plasma Monitor may not adjust itself with the
"Auto setup" function:
1) If the picture is not displayed fully on the screen.
2) When a contrast picture, such as an outdoor scene, is displayed on the
screen.
●
Depending on the signal and computer's configuration, "Auto setup"
function cannot be performed properly. In this case, adjust "Clock",
"Phase" and "Position" manually.
Direct operation
The Auto setup function can be operated directly by pressing the
AUTO PC button on the Remote Control Unit.
Press the AUTO PC button on the Remote Control Unit to start the
Auto setup and then the message "Now adjusting" will be displayed.
To return to the previous menu, press the STATUS button after the
adjustment is completed.
Clock
Adjust when Vertical noise lines are observed.
(Horizontal width will be changed by the adjustment.)
Adjust with the 78 buttons.
30

PC ADJUSTMENT

PC MODE ADJUSTMENT
buttons to select "PC mode adjustment" menu
buttons to select an item that you want to adjust,
PC MODE ADJUSTMENT MENU
Picture adjustment
Sound adjustment
Screen adjustment
Picture setup
Initial setup
PC mode adjustment
Screen saver
Information
Select OK
O K
Return M E N U Exit
STATUS
PC mode adjustment
Auto setup
Clock
Phase
Position
Power save
Select O K OK
Return M E N U Exit
STATUS
PC mode adjustment VIDEO ON-OFF
COMPONENT
VOLUME
Auto setup PC/DVI-D Proceed
7 8
WIDE Proceed OFF TIMER
STATUS Return M E N U Exit
PICTURE MOVE UP MUTE
OK
STATUS MOVE DOWN MENU
SURROUND POWER
ON
AUTO PC
OFF
AUTO PC button
Clock 1344