Sanyo PDP42H2W Owner's Manual page 9

CAUTION IN INSTALLATION
● It is recommended that the installation work be done by more than two people.
● When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the
attached accessory parts (the Speakers), otherwise it may result in damage of the products.
● Leave sufficient space for the installation work.
Installation Procedures
1 Before installation of the Speakers, check all the parts below are contained in the package.
Speakers
(2pcs)
2 Attach the brackets A and B to the Speakers with the large screws. Be sure each bracket is attached to the right
position of the speakers as below.
Large Screws
(2pcs)
Bracket-B
Speaker
Bracket-A
Large Screws
(2pcs)
NOTE :
It is not required to differentiate the Right Speaker and the Left Speaker.
INSTALLATION OF THE SPEAKERS
Brackets-A
(2pcs)
Large Screws
(5X12mm)
(8pcs)
Soft Tapes
Brackets-B
(2pcs)
(2pcs)
Small Screws
Speaker Cables
(4X12mm)
(2pcs)
(8pcs)
Large Screws
(2pcs)
Bracket-A
Speaker
Bracket-B
Large Screws
(2pcs)
PREPARATION
9